
Kitchen Remodeling in Newtown Square, PA
Custom kitchens for Newtown Square’s 1990s and 2000s subdivisions, mid-century traditionals, and contemporary rebuilds — designed and built by one team, on a fixed price, since 1989.
Last updated: May 2026 · Alex Smearman, Fedor Fabrication
Most kitchen remodels go wrong the same way
It’s almost always one of these three:
- The estimate that creeps the moment the walls come open.
- The crew that vanishes for two weeks at a stretch.
- The finger-pointing when the designer and the builder stop talking.
The fear of landing there is the real reason a lot of good kitchens stay dated for years — and it’s a reasonable one. It’s the thing we built this company to put to rest.
A Newtown Square kitchen is a major, months-long, often six-figure decision — and clients here tend to specify above the regional median, with custom cabinetry, paneled refrigeration, and integrated appliances as the default rather than the upgrade. The selections drive the budget, and the long lead times drive the schedule. So before you commit, you want straight answers — what it really costs, how long it really takes, and what it’s like to live through. That’s what the rest of this page is for.
We’ve rebuilt Newtown Square kitchens since 1989 on fixed-price contracts, with one point of contact who answers your calls — so the number is real before you sign, and you’re never the one chasing us.
What a Newtown Square kitchen remodel actually looks like

Most Newtown Square kitchen work falls into one of three jobs:
1990s and 2000s subdivisions — the largest share of Newtown Square housing (Toll Brothers, NVHomes, and local builders). Typical scope:
- Cabinetry to the ceiling — extend up or remove the soffit; the builder-grade boxes get replaced
- Quartz countertops in calmer patterns
- Modern lighting — under-cabinet LED, dedicated pendants, dimmer zones
- Higher-spec appliances — paneled refrigeration, pro-grade ranges
- Layout usually stays — these kitchens are large enough that wall removal isn’t needed
Mid-century traditionals (1950s–1970s) — smaller share, on the older established lots:
- Wall-removal openings are common — these were built closed-off
- Standard post-WWII pattern with high-finish materials
Post-2010 contemporary rebuilds — often only 8–12 years old when clients call. Refresh-tier scope: new quartz, higher-spec integrated fixtures.
What’s distinctive about Newtown Square: clients tend to specify above the regional median — integrated appliances, paneled refrigeration, and custom millwork are the default, not the upgrade.

The same crew, start to finish
The people in your home are our own carpenters — not subcontracted labor that shows up one day and disappears the next. It’s why the work holds up, and why homeowners keep telling us our crews are the most respectful, communicative people they’ve had in their house.
Cost ranges for Newtown Square kitchens
Bids for a project like this land all over the map — and the lowest one is usually the one that climbs the most once the walls come down. We’d rather hand you the honest range up front.
| Tier | Range | Typical Newtown Square project |
|---|---|---|
| Cosmetic Refresh | $30,000 – $45,000 | Refresh on a post-2010 contemporary kitchen |
| Pull-and-Replace | $40,000 – $75,000+ | Lighter-scope subdivision projects keeping appliances and lighting |
| Full Remodel | $65,000 – $120,000+ | Standard subdivision scope — most projects land here |
| Custom Kitchen Build | $100,000 – $150,000+ | Down-to-studs custom on subdivision or contemporary rebuild |
Two dials set the price: scope and finish — and they move independently. Scope is how much work and how big the project is — a cosmetic refresh keeps your layout and cabinet boxes and updates the surfaces; a pull-and-replace swaps everything within the same footprint; a full remodel moves walls and reworks the layout; a custom build takes the kitchen down to the studs. Finish is the separate dial: you can pull-and-replace with Sub-Zero, Wolf, and Great Northern cabinetry, or take a full custom build and stay budget-conscious with Tribeca cabinetry and GE Café appliances. The scope tier sets the size of the job; where you spend within it is yours to steer. We’ll install whatever you spec — the brands below are simply the lines we reach for most.
Newtown Square projects tend to specify above the regional median because of finish-level expectations. Material selection (especially custom cabinetry and paneled appliances) is the biggest budget lever. Appliances are not included in these ranges unless noted in your project scope.
Free Download
Want the full line-item breakdown?
The 2026 Southeastern PA Kitchen Cost Guide breaks down every tier — from a $30K refresh to a $150K+ custom build — with line-item costs from completed Fedor projects across Chester County, Delaware County, and the Main Line.
Free PDF · No spam · Unsubscribe anytime
Selections
The cabinetry, counters, and appliances we install
We build from lines that hold up in a working kitchen — not whatever’s on promotion. Here’s what we typically spec, and we don’t take supplier kickbacks on any of it:
- Cabinetry: six lines, accessible to fully custom — Tribeca, Aspect, Century, Shiloh, Eclipse, and Great Northern (plywood boxes, dovetailed drawers, soft-close throughout)
- Countertops: Cambria, Caesarstone, Silestone, and Emerston quartz; granite and quartzite slabs from Imperial Marble & Granite
- Plumbing fixtures: Kohler, Delta, Brizo, Hansgrohe, and Rohl — specified through Ferguson and Weinstein Supply
- Appliances: from GE Café and KitchenAid up to Sub-Zero, Wolf, Thermador, Miele, Bosch, and Monogram — sourced at cost through Gerhard’s
Our Design-Build Process

Most remodels go sideways for the same reason: design and construction don’t talk to each other. The designer draws something the builder can’t actually build for the price quoted, and you’re stuck in the middle.
We use a design-build model — the team that designs your Newtown Square kitchen is the team that builds it. By the time you get a contract, every line is priced and every spec confirmed — including the high-spec selections that drive Newtown Square budgets (paneled refrigeration, custom millwork, integrated appliances), so nothing drifts upward as an allowance. We sequence the work around Newtown Township’s inspection schedule and collaborate cleanly with your interior designer if you already have one.
The 8 steps, start to finish
- First Call — 15 minutes with Alex, the owner, to hear what you’re planning.
- In-Home Consultation — we walk the space and listen.
- Design + Initial Estimate — a concept and a real budget range.
- Selections & Refinement — every finish chosen before we build.
- Fixed-Price Proposal — every line priced; the number is real before you sign.
- Pre-Construction — permits, ordering, scheduling, staging.
- Construction — carpenter-led crews, one point of contact, weekly updates.
- Walkthrough + Warranty — closeout, backed by a 1-year workmanship warranty.
On schedule — and you’re never chasing us
“Nobody showed up for two weeks” doesn’t happen here. We block dedicated crew time and hold to it, with one point of contact who answers your calls and a live portal showing exactly where your project stands.

Ready when you are
That is exactly how your Newtown Square kitchen would run.
Fixed price, one point of contact, weekly updates, a 1-year workmanship warranty. The first step is a free 15-minute call — real numbers for your house and an honest answer on whether we are the right fit.
Newtown Township permitting for Newtown Square kitchen work
We handle all of it — every required permit, pulled through Newtown Township. Permit fees tend to run 1–2% of contract value and are included transparently on every Fedor proposal.
Suppliers we use for Newtown Square projects
- Plumbing fixtures: Ferguson (King of Prussia)
- Tile and stone: Devon Tile or The Tile Shop (King of Prussia)
- Flooring: Avalon Flooring (King of Prussia)
- Appliances: Gerhard’s Appliances (Ardmore)
Recent Work
Recent Newtown Square Projects






What Newtown Square Homeowners Say About Working With Us
★★★★★ 4.8 / 5
186+ verified reviews across Google and Angi
Reading reviews is the single best way to know what working with a contractor is actually like. We’d rather you read what our Main Line clients say in their own words than read marketing copy from us.
Everything from first meeting to final completion was a pleasure to work with the sales, craftsmen and ownership of Fedor. Everyone involved was committed to a quality design and installation of our new kitchen. We highly recommend Fedor Fabrication for kitchen and bath renovation. We are very pleased with our new kitchen.
Marianne M. — verified Google review
by far the best around ! kitchen and bathrooms in 2 homes that are outstanding …no need to interview other contractors !
Jack K. — verified Google review
Frequently Asked Questions
How much does a kitchen remodel cost in Newtown Square?
Newtown Square kitchen remodels run $30,000 to $150,000+, and most land in the Full Remodel tier. A lighter pull-and-replace keeping appliances and lighting runs $40K–$75K; a standard subdivision full remodel runs $65K–$120K+; a down-to-studs custom build on a subdivision or contemporary rebuild runs $100K–$150K+ and often beyond. Newtown Square skews high because clients here specify above the regional median — paneled refrigeration, custom millwork, integrated appliances. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.
How long does a Newtown Square subdivision kitchen remodel take?
Most Newtown Square kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site. The full timeline from first call to final walkthrough is typically 3–5 months. Subdivision homes have sound infrastructure so there’s no old-house surprise work, but high-spec custom cabinetry and paneled appliances carry longer lead times — that’s usually the schedule driver, not construction. We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.
What’s included in your fixed-price quote?
Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through our electrician, plumbing through our plumber, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. On a Newtown Square subdivision home there’s far less hidden old-house risk than on a borough home — the value of fixed price here is locking the high-spec selections so the number doesn’t drift as you choose finishes. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.
What happens when you open a wall in a 1990s Newtown Square home?
Far fewer surprises than in a pre-1940 borough home — 1990s and 2000s subdivision construction is modern, code-built, with sound wiring and plumbing. The main thing we confirm before opening a wall in these homes is whether it’s load-bearing, because open-concept-era floor plans often used engineered framing that needs a stamped beam design when you remove a wall. We bring in a Pennsylvania-registered structural engineer when a load path is involved, scoped and priced on the proposal. Anything we can’t fully see, we flag — but on these homes it’s the exception, not the rule.
Can I keep my existing kitchen layout?
Usually yes, on a subdivision home — most 1990s+ Newtown Square kitchens are large enough that the layout works and the project is really about taking cabinetry to the ceiling and lifting the finish level, which is a pull-and-replace. Mid-century traditionals are the exception: those were built closed-off and almost always benefit from a wall removal. We give you an honest read on your specific kitchen; we won’t push a layout change you don’t need just to grow the project.
What if I want to remove a wall or add an island?
Common on mid-century traditionals, less so on subdivision homes that already have open plans. If the wall is load-bearing — frequently the case in open-concept-era framing — we bring in a Pennsylvania-registered structural engineer for a stamped beam design, scoped and priced on the proposal, not improvised mid-project. A large island with seating, second sink, or beverage zone is one of the most-requested Newtown Square features; we account for the cabinet, electrical, and any plumbing runs it needs from the start.
What cabinetry and materials do you typically install in Newtown Square kitchens?
Newtown Square clients lean toward semi-custom and custom cabinetry to the ceiling, often with paneled appliances and integrated millwork. We spec cabinetry through Shiloh and Great Northern, tile and stone through Devon Tile or The Tile Shop in King of Prussia, plumbing fixtures through Ferguson, and appliances through Gerhard’s in Ardmore. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.
Do you work with my architect or interior designer?
Yes — many Newtown Square clients already have a design relationship. We function as the build half of a design-build collaboration: if you have drawings, we review them, tell you what works and what won’t build for the price assumed, then build to spec. If you don’t, our in-house design-build covers it end to end.
What appliance brands do you work with?
We work across the full price spectrum. On the high end, paneled Sub-Zero refrigeration, Wolf or Thermador ranges, and Miele integrated dishwashers come up regularly on Newtown Square projects. We also work with step-down lines like GE Monogram, GE Café, Bosch, and KitchenAid when clients want the look without the top-tier price tag. Appliance lead times are usually the longest item on a Newtown Square schedule, so we lock the package early.
What does Newtown Township permitting cost for a kitchen project?
Permit fees through Newtown Township typically run 1–2% of contract value. On a $110,000 subdivision kitchen, expect roughly $1,100–$2,200. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.
Do I need to hire my own designer?
No separate designer needed — we’re design-build, so the team that designs your Newtown Square kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted (and we collaborate cleanly if you already have a designer, which many Newtown Square clients do).
How will you communicate with me during construction?
During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices.
Can I see Newtown Square kitchen projects you’ve completed?
Yes — see our Newtown Square lantern pendants kitchen remodel and the full project portfolio.
Do you also remodel bathrooms in Newtown Square?
Yes — Newtown Square bathroom remodeling — same fixed-price model, same Newtown Township permitting, same in-house crews. See everything we do in Newtown Square.
Sources & References
- Newtown Township
- Ferguson Bath, Kitchen & Lighting Gallery
- Devon Tile
- The Tile Shop
- Avalon Flooring
- Gerhard’s Appliances
- Pennsylvania Attorney General HIC Verification
- National Kitchen & Bath Association
Kitchen remodeling nearby: Wayne, Villanova, Media, Broomall. Or see all Newtown Square remodeling services.
Schedule a Free Consultation
Ready to Start Planning Your Newtown Square Kitchen Remodel?
Remodeling a kitchen is a big, personal decision — you should feel good about who you hand it to. The easiest first step is a free 15-minute call with Alex, the owner, to get real numbers for your Newtown Square kitchen and an honest read on whether we’re a fit.
Or call us: 610-431-7150 · PA HIC #PA202519