Kitchen Remodeling Wayne PA

Wayne kitchen costs — why Radnor Township projects skew higher

Wayne stone colonial kitchens almost always run in Tiers 3 and 4. Refresh-tier projects are rare.

Tier	Range	Typical Wayne project
Cosmetic Refresh	$30,000 – $45,000	Rare — only on post-2000 contemporary rebuilds
Pull-and-Replace	$40,000 – $75,000+	Possible on smaller mid-century homes
Full Remodel	$65,000 – $120,000+	Standard stone colonial scope including infrastructure
Custom Kitchen Build	$100,000 – $150,000+	Down-to-studs on a larger Wayne stone colonial

Wayne stone colonial kitchens typically land in the upper end of the published ranges because of the structural and infrastructure work plus higher finish-level expectations. The Custom Build tier doesn’t carry a hard ceiling — full custom projects with paneled appliances, inset cabinetry, structural work, and premium materials regularly exceed $150K. Appliances are not included in these ranges unless noted in your project scope.

Where we source for high-finish Wayne kitchens

• Plumbing fixtures: Ferguson (King of Prussia)
• Tile and stone: Devon Tile or The Tile Shop (King of Prussia)
• Flooring: Avalon Flooring (King of Prussia)
• Appliances: Gerhard’s Appliances (Ardmore)

Frequently Asked Questions

How much does a kitchen remodel cost in Wayne?

Wayne kitchen remodels run $40,000 to $150,000+, and most land in the upper tiers. A pull-and-replace on a smaller mid-century home runs $40K–$75K; a full stone colonial remodel including infrastructure work runs $65K–$120K+; a down-to-studs custom build on a larger Wayne colonial runs $100K–$150K+, and fully custom projects with paneled appliances and inset cabinetry go beyond that. Wayne skews high because pre-1930 stone colonials need electrical service replacement, replumbing, and structural work newer homes don’t. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.

How long does a Wayne stone colonial kitchen remodel take?

Most Wayne kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site. The full timeline from first call to final walkthrough is typically 3–5 months, because a pre-1930 stone colonial adds steps a newer home doesn’t — opening to the butler’s pantry, electrical service replacement, replumbing, and Radnor Township inspections between phases. We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.

What’s included in your fixed-price quote?

Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through S.B. Electric, plumbing through AA to Z, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. The known old-house work — panel replacement, galvanized-to-copper replumb, structural work to open a wall — is priced in, not left as an allowance that balloons later. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.

What happens when you open a wall in a 1900s Wayne home?

In a pre-1930 Wayne stone colonial we almost always find something behind the plaster — knob-and-tube wiring, an undersized 1970s panel, galvanized supply lines, or framing that isn’t where the drawings assume. None of it surprises us; it’s why these projects take real expertise to run. We price what we can see directly on the proposal and flag what we can’t. If hidden conditions surface at demo, we document, photograph, price, and get your written approval before proceeding. No silent change orders.

Can I keep my existing kitchen layout?

Sometimes — but on a Wayne stone colonial it’s usually worth opening the wall to the original butler’s pantry or the dining room, which is the single most common change we make here. If the existing layout genuinely works and you just want new cabinetry, counters, and finishes, that’s a pull-and-replace — faster and less expensive. We give you an honest read on your specific kitchen; keeping a bad layout to save money is the change homeowners regret most within a year.

What if I want to remove a wall or add an island?

Common on Wayne projects. Many stone colonial kitchens were built closed-off, and opening to the butler’s pantry or dining room transforms how the house lives. If the wall is load-bearing — frequently the case in these homes — we bring in Rise Engineering for a stamped beam design, scoped and priced on the proposal, not improvised mid-project. A marble or stone island is one of the most-requested Wayne features; we account for the cabinet, electrical, and any plumbing runs it needs from the start.

What cabinetry and materials do you typically install in Wayne kitchens?

Wayne clients lean toward inset cabinetry in painted or stained finish, often with paneled appliances to keep the period look. We spec cabinetry through Shiloh and Great Northern, tile and stone through Devon Tile or The Tile Shop in King of Prussia, plumbing fixtures through Ferguson, and appliances through Gerhard’s in Ardmore. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.

Do you work with my architect or interior designer?

Yes — it’s common on Wayne projects, more so than anywhere else we work. Many Wayne homeowners engage an architect or interior designer from the start, and we function as the build half of a design-build collaboration. If you already have drawings, we review them, tell you what works and what won’t build for the price assumed, then build to spec. If you don’t, our in-house design-build covers it end to end.

My Wayne home has knob-and-tube wiring. Can you replace it?

Yes. The visible work — panel replacement, the wiring runs we can identify on the walk, the new circuits the kitchen needs — gets scoped and priced directly on the proposal. For hidden knob-and-tube buried inside walls or attic chases we can’t see until demolition, the proposal notes that hidden infrastructure may surface; if it does, we walk you through scope and cost before any change order. Many pre-1930 Wayne stone colonials still run on a 1970s 100-amp panel that has to come out for a modern kitchen anyway.

What does Radnor Township permitting cost for a Wayne kitchen project?

Permit fees through Radnor Township typically run 1–2% of contract value. On a $130,000 stone colonial kitchen, expect roughly $1,300–$2,600. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.

Do I need to hire my own designer?

No separate designer needed — we’re design-build, so the team that designs your Wayne kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted (and we collaborate cleanly if you already have an architect).

How will you communicate with me during construction?

During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices. On a 100-year-old house, that communication is the difference between a manageable project and a stressful one.

Can I see Wayne kitchen projects you’ve completed?

Yes — see our Wayne marble island kitchen remodel and the full project portfolio.

Do you also remodel bathrooms in Wayne?

Yes — Wayne bathroom remodeling — same fixed-price model, same Radnor Township permitting, same in-house crews.