Kitchen Remodeling Broomall PA

Cost ranges for Broomall kitchens

Tier	Range	Typical Broomall project
Cosmetic Refresh	$30,000 – $45,000	Refresh on a post-2010 contemporary kitchen
Pull-and-Replace	$40,000 – $75,000+	Lighter-scope subdivision projects keeping appliances and lighting
Full Remodel	$65,000 – $120,000+	Standard subdivision scope — most projects land here
Custom Kitchen Build	$100,000 – $150,000+	Down-to-studs custom on subdivision or contemporary rebuild

Broomall projects tend to specify above the regional median because of finish-level expectations. Material selection (especially custom cabinetry and paneled appliances) is the biggest budget lever. Appliances are not included in these ranges unless noted in your project scope.

Suppliers we use for Broomall projects

• Plumbing fixtures: Ferguson (King of Prussia)
• Tile and stone: Devon Tile or The Tile Shop (King of Prussia)
• Flooring: Avalon Flooring (King of Prussia)
• Appliances: Gerhard’s Appliances (Ardmore)

Frequently Asked Questions

How much does a kitchen remodel cost in Broomall?

Broomall kitchen remodels run $30,000 to $150,000+, and most land in the Full Remodel tier. A lighter pull-and-replace keeping appliances and lighting runs $40K–$75K; a standard subdivision full remodel runs $65K–$120K+; a down-to-studs custom build on a subdivision or contemporary rebuild runs $100K–$150K+ and often beyond. Broomall skews high because clients here specify above the regional median — paneled refrigeration, custom millwork, integrated appliances. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.

How long does a Broomall subdivision kitchen remodel take?

Most Broomall kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site. The full timeline from first call to final walkthrough is typically 3–5 months. Subdivision homes have sound infrastructure so there’s no old-house surprise work, but high-spec custom cabinetry and paneled appliances carry longer lead times — that’s usually the schedule driver, not construction. We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.

What’s included in your fixed-price quote?

Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through S.B. Electric, plumbing through AA to Z, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. On a Broomall subdivision home there’s far less hidden old-house risk than on a older Broomall home — the value of fixed price here is locking the high-spec selections so the number doesn’t drift as you choose finishes. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.

What happens when you open a wall in a 1950s or 1960s split-level Broomall home?

Far fewer surprises than in a pre-1940 older Broomall home — 1990s and 2000s subdivision construction is modern, code-built, with sound wiring and plumbing. The main thing we confirm before opening a wall in these homes is whether it’s load-bearing, because open-concept-era floor plans often used engineered framing that needs a stamped beam design when you remove a wall. We bring in Rise Engineering when a load path is involved, scoped and priced on the proposal. Anything we can’t fully see, we flag — but on these homes it’s the exception, not the rule.

Can I keep my existing kitchen layout?

Usually yes, on a subdivision home — most 1990s+ Broomall kitchens are large enough that the layout works and the project is really about taking cabinetry to the ceiling and lifting the finish level, which is a pull-and-replace. Mid-century traditionals are the exception: those were built closed-off and almost always benefit from a wall removal. We give you an honest read on your specific kitchen; we won’t push a layout change you don’t need just to grow the project.

What if I want to remove a wall or add an island?

Common on mid-century traditionals, less so on subdivision homes that already have open plans. If the wall is load-bearing — frequently the case in open-concept-era framing — we bring in Rise Engineering for a stamped beam design, scoped and priced on the proposal, not improvised mid-project. A large island with seating, second sink, or beverage zone is one of the most-requested Broomall features; we account for the cabinet, electrical, and any plumbing runs it needs from the start.

What cabinetry and materials do you typically install in Broomall kitchens?

Broomall clients lean toward semi-custom and custom cabinetry to the ceiling, often with paneled appliances and integrated millwork. We spec cabinetry through Shiloh and Great Northern, tile and stone through Devon Tile or The Tile Shop in King of Prussia, plumbing fixtures through Ferguson, and appliances through Gerhard’s in Ardmore. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.

Do you work with my architect or interior designer?

Yes — many Broomall clients already have a design relationship. We function as the build half of a design-build collaboration: if you have drawings, we review them, tell you what works and what won’t build for the price assumed, then build to spec. If you don’t, our in-house design-build covers it end to end.

What appliance brands do you work with?

We work across the full price spectrum. On the high end, paneled Sub-Zero refrigeration, Wolf or La Cornue ranges, and Miele integrated dishwashers come up regularly on Broomall projects. We also work with step-down lines like GE Monogram, GE Café, Bosch, and KitchenAid when clients want the look without the top-tier price tag. Appliance lead times are usually the longest item on a Broomall schedule, so we lock the package early.

What does Marple Township permitting cost for a kitchen project?

Permit fees through Marple Township typically run 1–2% of contract value. On a $110,000 subdivision kitchen, expect roughly $1,100–$2,200. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.

Do I need to hire my own designer?

No separate designer needed — we’re design-build, so the team that designs your Broomall kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted (and we collaborate cleanly if you already have a designer, which many Broomall clients do).

How will you communicate with me during construction?

During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices.

Can I see Broomall kitchen projects you’ve completed?

Yes — see our Lantern Pendants Kitchen Remodel and the full project portfolio.

Do you also remodel bathrooms in Broomall?

Yes — Broomall bathroom remodeling — same fixed-price model, same Marple Township permitting, same in-house crews.