
Kitchen Remodeling Exton PA
Exton kitchens are some of the most predictable projects we run. Almost every home is 1990s or 2000s subdivision construction in West Whiteland Township — sound bones, clean infrastructure, and the same builder-grade kitchen problems repeating across every neighborhood. Cabinet boxes that stop 18 inches below the ceiling. Builder-grade granite or laminate countertops. The original four-piece appliance package. The cabinet-replacement pattern hits these kitchens square, and we’ve run the playbook hundreds of times since 1989.
Want full kitchen remodeling info? See our Kitchen Remodeling overview →
Remodeling Your Exton Kitchen — What to Expect
Since 1989, Fedor has rebuilt kitchens across Exton, West Whiteland Township, and Chester County — running cabinetry to the ceiling, swapping builder-grade granite for calmer quartz, and modernizing lighting and appliances, all on a fixed-price contract with a single point of contact who answers your calls.
Free Download
2026 Southeastern PA Kitchen Cost Guide
A complete 2026 kitchen cost reference for Chester County, Delaware County, and the Main Line — every tier, from a $30K refresh to a $150K+ custom build.
What every Exton builder-grade kitchen needs fixed
Almost every Exton kitchen we open up was built between 1992 and 2008 by Toll Brothers, Pulte, and other large homebuilders working West Whiteland during the housing boom. The remodel pattern is consistent:
The cabinet boxes have to come out. Original builder-grade cabinets stop at 36–42 inches with a drywalled soffit above. Running cabinetry all the way to the ceiling — either extending up from the existing height or removing the soffit and extending to the ceiling — happens on nearly every Exton kitchen project we run.
Countertops upgrade to quartz. The original laminate or builder-grade slab granite (often a busy granite from the 2000s pattern era) is rarely worth keeping. Quartz in calmer patterns has dominated Exton specifications for the past 5+ years.
Appliances upgrade. The original Whirlpool or Frigidaire four-piece package gets replaced with something the homeowner actually picked. Mid-range Bosch, KitchenAid, or Café is the most common spec; some clients go higher with Sub-Zero or Wolf.
Lighting actually gets thought about. Original Exton kitchens have a single can light over the sink and a recessed array on a single switch. Modern projects add under-cabinet LED, dedicated pendant lighting over the island, and dimmer-controlled zones.
Layout usually stays. Exton kitchens are large enough — most are 13′ × 16′ or larger — that wall removal isn’t usually needed. The footprint stays; the way the room reads changes.
Infrastructure is rarely the project. These are post-1990 builds with modern electrical service and modern plumbing. We’re not fighting structure, replacing knob-and-tube, or replumbing galvanized lines. The work is finishes and finishes-adjacent.
Exton kitchen costs — predictable scope, predictable pricing
Exton projects hit the published ranges cleanly because the scope is so consistent.
| Tier | Range | Typical Exton project |
|---|---|---|
| Cosmetic Refresh | $30,000 – $45,000 | Rare — kitchens with sound cabinet boxes getting just door/drawer/counter swaps |
| Pull-and-Replace | $40,000 – $75,000+ | Lighter-scope Exton projects keeping appliances and lighting |
| Full Remodel | $65,000 – $120,000+ | Standard Exton scope — most projects land here |
| Custom Kitchen Build | $100,000 – $150,000+ | Down-to-studs full reconfiguration; rare on standard Exton tract homes |
Most Exton kitchens fall in the Full Remodel range ($65K–$120K+). Clients here aren’t usually doing cosmetic-only work — they’re redoing the kitchen end-to-end: new cabinetry to the ceiling, new countertops, new appliances, new lighting, new flooring in many cases. Material selection is the biggest budget lever — clients can move from $75K to $110K just by choosing fully custom over semi-custom cabinetry, or paneled appliances over standard. Appliances are not included in these ranges unless noted in your project scope.
Our Design-Build Process
Most remodels go sideways for the same reason: design and construction don’t talk to each other. The designer draws something the builder can’t actually build for the price quoted, and you’re stuck in the middle.
We use a design-build model — the team that designs your Exton kitchen is the team that builds it. Every line on the drawing has been priced. Every spec has been confirmed. Because most Exton subdivision kitchens are sound post-1990 builds, the work is finishes-driven and the number we hand you is tight: cabinetry runs to the ceiling, the soffit decision is made before demo, and material selections are locked before we order. We sequence the work around West Whiteland Township’s inspection schedule so the project doesn’t stall waiting on the township.
The 8 steps, start to finish
- First Call — a 10–15 minute conversation to understand what you’re planning and whether it makes sense to meet.
- In-Home Consultation — we walk your space, listen, and learn what matters most in the finished result.
- Design Call + Initial Estimate — an initial design concept and a real budget range, walked through together.
- Selections & Design Refinement — cabinetry, countertops, tile, fixtures, hardware, lighting, paint — every choice made before we build.
- Fixed-Price Proposal + Contract — every line priced and confirmed buildable. The number is real before you sign.
- Pre-Construction — permits, ordering, scheduling, and material staging so the job runs without gaps.
- Construction — carpenter-led crews, a single point of contact, weekly updates, no surprise upcharges.
- Final Walkthrough + Warranty — we close out every detail and back the work with a 1-year workmanship warranty.
West Whiteland Township permitting for Exton kitchen work
We handle permitting for your project through West Whiteland Township. Permit fees tend to run 1–2% of contract value and are included transparently on every Fedor proposal.
Where we source for Exton kitchen remodels
- Plumbing fixtures: Ferguson (King of Prussia)
- Tile and stone: The Tile Shop (King of Prussia)
- Flooring: Avalon Flooring (King of Prussia)
- Appliances: Gerhard’s Appliances (Malvern)
Recent Work
Featured Exton Project

Cherry Shaker Kitchen
Full builder-grade-to-custom cabinet replacement with the soffit removed and cabinetry run to the ceiling.
What Exton Homeowners Say About Working With Us
★★★★★ 4.8 / 5
186+ verified reviews across Google and Angi
Reading reviews is the single best way to know what working with a contractor is actually like. We’d rather you read what our Chester County clients say in their own words than read marketing copy from us.
Everything from first meeting to final completion was a pleasure to work with the sales, craftsmen and ownership of Fedor. Everyone involved was committed to a quality design and installation of our new kitchen. We highly recommend Fedor Fabrication for kitchen and bath renovation. We are very pleased with our new kitchen.
Marianne M. — verified Google review
by far the best around ! kitchen and bathrooms in 2 homes that are outstanding …no need to interview other contractors !
Jack K. — verified Google review
Frequently Asked Questions
How much does a kitchen remodel cost in Exton?
Exton kitchen remodels run $30,000 to $150,000+, and most land in the Full Remodel range. A rare cosmetic refresh on sound cabinet boxes runs $30K–$45K; a lighter pull-and-replace keeping appliances and lighting runs $40K–$75K+; a standard end-to-end West Whiteland subdivision kitchen — cabinetry to the ceiling, new quartz, appliances, lighting, flooring — runs $65K–$120K+; a down-to-studs reconfiguration is rare on tract homes but reaches $100K–$150K+. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.
Will my Exton subdivision kitchen be ready before the holidays?
Most Exton-area kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site, though scope and supply timing can extend that. The full timeline from first call to final walkthrough is typically 3–4 months. Because these are sound post-1990 West Whiteland builds with no infrastructure surprises, Exton timelines are among the most predictable we quote. We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.
What’s included in your fixed-price quote?
Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through S.B. Electric, plumbing through AA to Z, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. On an Exton subdivision kitchen the scope is predictable, so the number is tight — the soffit decision and cabinetry height are settled before demo, not improvised. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.
What happens when you open a wall in a 1990s Exton home?
Far less drama than an old house. Exton subdivision homes built 1992–2008 use modern framing, copper or PEX supply, and modern electrical service — there’s no knob-and-tube, no galvanized pipe, no surprise structure behind the drywall. The most common find is a soffit we can remove to run cabinetry to the ceiling, or an interior wall that turns out to be non-load-bearing. We price what we can see directly on the proposal; if anything unexpected does surface at demo, we document, photograph, price, and get your written approval before proceeding. No silent change orders.
Can I keep my existing Exton kitchen layout?
Usually yes — and on most Exton subdivision kitchens you should. These rooms are typically 13′ × 16′ or larger and laid out reasonably well from the builder; the problem is the finishes, not the footprint. Keeping the layout and doing a full pull-and-replace — new cabinetry to the ceiling, quartz, appliances, lighting — gets you a completely different kitchen without the cost and timeline of moving walls. We give you an honest read on your specific kitchen; we won’t sell you wall removal you don’t need.
What if I want to remove a wall or add an island?
Both are doable. Some Exton homeowners want to open the kitchen to an adjacent dining or family room; if that wall is load-bearing we bring in Rise Engineering for a stamped beam design, scoped and priced on the proposal, not improvised mid-project. Many Exton kitchens already have an island or a footprint that takes one easily — we account for the cabinet, electrical, and any plumbing runs a new or enlarged island needs from the start.
What cabinetry and materials do you typically install in Exton kitchens?
Exton clients most often spec semi-custom or custom cabinetry to the ceiling in painted or stained finish, calmer quartz countertops over the busy 2000s granite, and a mid-range appliance package (Bosch, KitchenAid, Café) — some go higher with Sub-Zero or Wolf. We spec cabinetry through Shiloh and Great Northern, tile and stone through The Tile Shop in King of Prussia, plumbing fixtures through Ferguson, and appliances through Gerhard’s in Malvern. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.
My Exton home is in one of the 1990s or 2000s developments. Have you worked there?
Probably yes. We’ve done kitchens across most of the major Exton developments since the 1990s — the tract-home pattern repeats, even when the builder and the year change. If you tell us your address, we can usually tell you within a minute or two whether we’ve worked in your specific community, and what the kitchen in your floor plan typically needs.
Do you work with my architect or interior designer?
Yes. Most Exton subdivision kitchens don’t need an outside architect — the work is finishes-driven and our in-house design-build covers it end to end. If you’re already working with a kitchen designer or an architect on a larger reconfiguration, we review the drawings, tell you what works and what won’t build for the price assumed, then build to spec as the build half of the collaboration.
Do I need a full plan submittal for a standard cabinet-replacement project?
Usually no. West Whiteland Township generally accepts general layouts and notes for kitchen remodels that don’t change the layout or remove load-bearing walls — which describes most Exton subdivision projects. If your project does move a load-bearing wall, a stamped structural detail and a fuller submittal are required; we handle the entire permit package either way and show the cost as a line item on the proposal.
What does West Whiteland Township permitting cost for an Exton kitchen project?
Permit fees through West Whiteland Township typically run 1–2% of contract value. On a $65,000 kitchen, expect roughly $650–$1,300; on a $110,000 full remodel, roughly $1,100–$2,200. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.
Do I need to hire my own designer?
No separate designer needed — we’re design-build, so the team that designs your Exton kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted.
How will you communicate with me during construction?
During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices. On a predictable Exton subdivision kitchen, that communication is what keeps a smooth project smooth.
Can I see Exton kitchen projects you’ve completed?
Yes — see our Exton cherry shaker kitchen remodel and the full project portfolio.
Do you also remodel bathrooms in Exton?
Yes — Exton bathroom remodeling — same fixed-price model, same West Whiteland Township permitting, same in-house crews.
Schedule a Free Consultation
Ready to Start Planning Your Exton Kitchen Remodel?
A free 15-minute discovery call with Alex is the fastest way to get real cost ranges for your Exton kitchen and a straight answer about whether we’re the right fit.
Not ready for a call? Send us a message and we’ll reply within one business day.
Or call us: 610-431-7150 · PA HIC #PA202519