Kitchen Remodeling in Kennett Square, PA

Kennett Square kitchen costs across varied housing stock

Bids for a project like this land all over the map — and the lowest one is usually the one that climbs the most once the walls come down. We’d rather hand you the honest range up front.

Tier	Range	Typical Kennett Square project
Cosmetic Refresh	$30,000 – $45,000	Post-2000 subdivision kitchen with sound bones
Pull-and-Replace	$40,000 – $75,000+	Standard subdivision or post-WWII scope
Full Remodel	$65,000 – $120,000+	Borough Victorian with infrastructure work
Custom Kitchen Build	$100,000 – $150,000+	Stone farmhouse or full borough rebuild

Two dials set the price: scope and finish — and they move independently. Scope is how much work and how big the project is — a cosmetic refresh keeps your layout and cabinet boxes and updates the surfaces; a pull-and-replace swaps everything within the same footprint; a full remodel moves walls and reworks the layout; a custom build takes the kitchen down to the studs. Finish is the separate dial: you can pull-and-replace with Sub-Zero, Wolf, and Great Northern cabinetry, or take a full custom build and stay budget-conscious with Tribeca cabinetry and GE Café appliances. The scope tier sets the size of the job; where you spend within it is yours to steer. We’ll install whatever you spec — the brands below are simply the lines we reach for most.

Borough and stone farmhouse projects often land in higher tiers than subdivision projects due to infrastructure and historic-respectful work. Subdivision projects hit the published ranges cleanly. Appliances are not included in these ranges unless noted in your project scope.

Where we source for Kennett Square kitchens

• Plumbing fixtures: Ferguson (Delaware) — Wilmington, DE showrooms also available; or Ferguson (King of Prussia)
• Tile and stone: The Tile Shop (Wilmington, DE)
• Flooring: Avalon Flooring (Wilmington, DE)
• Appliances: Gerhard’s Appliances (Malvern)

Frequently Asked Questions

How much does a kitchen remodel cost in Kennett Square?

Kennett Square kitchen remodels run $30,000 to $150,000+, and the tier depends heavily on the house. A post-2000 subdivision cosmetic refresh runs $30K–$45K; a standard subdivision or post-WWII pull-and-replace runs $40K–$75K+; a borough Victorian full remodel with electrical service replacement and replumb runs $65K–$120K+; a pre-1900 stone farmhouse or full borough rebuild runs $100K–$150K+. Borough and farmhouse projects skew higher because of infrastructure and historic-respectful work. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.

How long does a Kennett Square kitchen remodel take?

Most Kennett Square kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site. The full timeline from first call to final walkthrough is typically 3–5 months — a post-2000 subdivision kitchen is on the shorter end, while a borough Victorian or stone farmhouse adds steps (electrical service replacement, replumb, plaster restoration, Kennett Borough inspections between phases). We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.

What’s included in your fixed-price quote?

Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through our electrician, plumbing through our plumber, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. On a borough Victorian, the known old-house work — panel replacement, galvanized-to-copper replumb, plaster restoration — is priced in, not left as an allowance that balloons later. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.

What happens when you open a wall in an 1880s Kennett Borough home?

In an 1880–1920 Kennett Borough Victorian or a pre-1900 stone farmhouse we almost always find something behind the plaster — a 1960s panel still in service, galvanized supply lines, original hand-framing that isn’t where drawings assume, or 18-inch fieldstone where a clean opening was hoped for. None of it surprises us; it’s why these projects take real expertise to run. We price what we can see directly on the proposal and flag what we can’t. If hidden conditions surface at demo, we document, photograph, price, and get your written approval before proceeding. No silent change orders.

Can I keep my existing kitchen layout?

It depends on the house. In a post-2000 Kennett subdivision the layout usually works and a pull-and-replace is the right call. In an 1880s borough Victorian the original kitchen is a small back-of-house room — opening the wall to the dining room or absorbing the old back porch is usually worth it and the single most common change we make there. We give you an honest read on your specific kitchen; keeping a cramped Victorian layout to save money is the change homeowners regret most within a year.

What if I want to remove a wall or add an island?

Common on Kennett projects, especially borough Victorians and post-WWII ranches where opening to the dining room transforms how the house lives. If the wall is load-bearing — or a fieldstone wall in a stone farmhouse — we bring in a Pennsylvania-registered structural engineer for a stamped beam design, scoped and priced on the proposal, not improvised mid-project. An island is one of the most-requested Kennett features; we account for the cabinet, electrical, and any plumbing runs it needs from the start.

What cabinetry and materials do you typically install in Kennett Square kitchens?

It tracks the house: inset or Shaker cabinetry in painted finish is the right call for borough Victorians and stone farmhouses; subdivision kitchens lean semi-custom to the ceiling. We spec cabinetry through Shiloh and Great Northern, with tile, stone, and flooring sourced through The Tile Shop and Avalon Flooring (Wilmington, DE), plumbing fixtures through Ferguson, and appliances through Gerhard’s in Malvern. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.

My borough home is in a historic district. Will I have restrictions?

Likely some, on anything visible from the street — windows, exterior doors, and facade changes in the Kennett Borough historic district can require review. Interior kitchen work is rarely restricted. We’ve worked the borough since 1989 and handle the historic review where it applies, building it into the schedule so it doesn’t surprise you mid-project. Tell us your address and we’ll tell you what, if anything, applies to your specific home.

Can you preserve original wood floors and trim?

Yes — preservation work is standard scope on borough Victorian and stone farmhouse projects. Original pine flooring, plaster walls, and period trim are part of what makes these Kennett homes worth keeping; we restore rather than replace wherever it’s structurally sound, and we tell you up front which approach your specific house calls for and what it costs.

What does Kennett Square Borough permitting cost for a kitchen project?

Permit fees through Kennett Borough typically run 1–2% of contract value. On a $90,000 borough Victorian kitchen, expect roughly $900–$1,800. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.

Do I need to hire my own designer?

No separate designer needed — we’re design-build, so the team that designs your Kennett Square kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted (and we collaborate cleanly if you already have an architect).

How will you communicate with me during construction?

During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices. On a 100-year-old borough house, that communication is the difference between a manageable project and a stressful one.

Can I see Kennett Square kitchen projects you’ve completed?

Yes — see our Kennett Square curved maple island kitchen remodel and the full project portfolio.

Do you also remodel bathrooms in Kennett Square?

Yes — Kennett Square bathroom remodeling — same fixed-price model, same Kennett Borough permitting, same in-house crews. See everything we do in Kennett Square.