Kitchen Remodeling in Phoenixville, PA

Cost ranges for Phoenixville kitchens

Bids for a project like this land all over the map — and the lowest one is usually the one that climbs the most once the walls come down. We’d rather hand you the honest range up front.

Tier	Range	Typical Phoenixville project
Cosmetic Refresh	$30,000 – $45,000	Foundry-district condo or post-2000 subdivision
Pull-and-Replace	$40,000 – $75,000+	Lighter-scope township projects keeping appliances and lighting
Full Remodel	$65,000 – $120,000+	Standard subdivision and borough scope — most projects land here
Custom Kitchen Build	$100,000 – $150,000+	Down-to-studs custom on borough Victorian

Two dials set the price: scope and finish — and they move independently. Scope is how much work and how big the project is — a cosmetic refresh keeps your layout and cabinet boxes and updates the surfaces; a pull-and-replace swaps everything within the same footprint; a full remodel moves walls and reworks the layout; a custom build takes the kitchen down to the studs. Finish is the separate dial: you can pull-and-replace with Sub-Zero, Wolf, and Great Northern cabinetry, or take a full custom build and stay budget-conscious with Tribeca cabinetry and GE Café appliances. The scope tier sets the size of the job; where you spend within it is yours to steer. We’ll install whatever you spec — the brands below are simply the lines we reach for most.

Borough projects often land in higher tiers than subdivision projects due to infrastructure work and historic-respectful detailing. Subdivision projects hit the published ranges cleanly. The Custom Build tier doesn’t carry a hard ceiling — fully custom borough Victorian projects with restored exposed brick, period-respectful detailing, and premium materials can exceed $150K. Appliances are not included in these ranges unless noted in your project scope.

Suppliers we use for Phoenixville projects

• Plumbing fixtures: Ferguson (King of Prussia)
• Tile and stone: The Tile Shop (King of Prussia)
• Flooring: Avalon Flooring (King of Prussia)
• Appliances: Gerhard’s Appliances (Phoenixville — in town)

Frequently Asked Questions

How much does a kitchen remodel cost in Phoenixville?

Phoenixville kitchen remodels run $30,000 to $150,000+. A cosmetic refresh on a Foundry-district condo or post-2000 subdivision runs $30K–$45K; a pull-and-replace on a lighter-scope township project runs $40K–$75K; a full remodel — standard subdivision and borough scope, where most projects land — runs $65K–$120K+; a down-to-studs custom build on a borough Victorian runs $100K–$150K+ and can go beyond that. Borough projects skew higher than subdivision projects because of infrastructure work and historic-respectful detailing. Appliances aren’t included unless noted in scope. The free cost guide above breaks every tier down.

How long does a Phoenixville steel-era rowhome kitchen remodel take?

Most Phoenixville-area kitchen remodels run 6–8 weeks of active construction once cabinetry and materials are on site. The full timeline from first call to final walkthrough is typically 3–5 months, because an 1880s borough rowhome adds steps a subdivision home doesn’t — opening to the dining room, brick restoration, electrical service replacement, replumbing, and Phoenixville Borough inspections between phases. We give you a hard date at proposal and update it weekly in the JobTread portal so you always know where the project stands.

What’s included in your fixed-price quote?

Everything we can see at signing: design, all materials (cabinetry, countertops, tile, fixtures, hardware), all labor and trade partners (electrical through our electrician, plumbing through our plumber, tile, finish carpentry), permits, inspections, dumpster, project management, and the final walkthrough. The known old-house work — panel replacement, galvanized-to-copper replumb, brick restoration, structural work to open a wall — is priced in, not left as an allowance that balloons later. Appliances are included only if noted in your scope. The only thing that changes the number is scope you add after signing, documented and approved by you in writing first.

What happens when you open a wall in an 1880s Phoenixville rowhome?

In a pre-1920 Phoenixville steel-era home we frequently find something behind the plaster — exposed brick that was hidden under decades of paneling, knob-and-tube remnants, a 1960s panel, galvanized supply lines, or framing that isn’t where the drawings assume. None of it surprises us; it’s why these projects take real expertise to run. We price what we can see directly on the proposal and build contingency into the proposal phase for borough surprises. If hidden conditions surface at demo, we document, photograph, price, and get your written approval before proceeding. No silent change orders.

Can I keep my existing kitchen layout?

Sometimes — but on a Phoenixville borough rowhome it’s usually worth opening the wall to the dining room or back parlor, which is the single most common change we make here. Original steel-era kitchens were built as tight back-of-house spaces. If the existing layout genuinely works and you just want new cabinetry, counters, and finishes, that’s a pull-and-replace — faster and less expensive. We give you an honest read on your specific kitchen; keeping a bad layout to save money is the change homeowners regret most within a year.

Can you preserve the original brick wall when we open up the kitchen?

Yes — it’s one of the most common Phoenixville asks, and exactly the kind of work the borough’s buyer base wants. We see exposed brick hidden under paneling or drywall on roughly half of borough rowhome projects. We assess the brick condition during demolition, then design around it — restored exposed brick paired with new cabinetry, sometimes with industrial-leaning hardware to nod to the steel-mill heritage. If a wall comes out and it’s load-bearing, we bring in a Pennsylvania-registered structural engineer for a stamped beam design, scoped and priced on the proposal, not improvised mid-project.

What cabinetry and materials do you typically install in Phoenixville kitchens?

Borough clients lean toward inset or Shaker cabinetry in painted finish, sometimes with industrial-leaning hardware that references the steel-mill heritage. We spec cabinetry through Shiloh and Great Northern, tile and stone through The Tile Shop in King of Prussia, plumbing fixtures through Ferguson, and appliances through Gerhard’s in Phoenixville. We don’t take supplier kickbacks — the recommendation is based on what holds up in a working kitchen, not on our margin.

Do you work with my architect or interior designer?

Yes. If you already have drawings, we review them, tell you what works and what won’t build for the price assumed, then build to spec. If you don’t, our in-house design-build covers it end to end. On Phoenixville borough restoration projects, where preserving original character matters, that early design-build coordination is what keeps the period detailing and the budget from fighting each other.

My borough home has knob-and-tube wiring. Can you replace it?

Yes. The visible work — panel replacement, the wiring runs we can identify on the walk, the new circuits the kitchen needs — gets scoped and priced directly on the proposal. For hidden knob-and-tube buried inside walls or attic chases we can’t see until demolition, the proposal notes that hidden infrastructure may surface; if it does, we walk you through scope and cost before any change order. Many pre-1960 Phoenixville borough homes are still on a 1960s panel that has to come out for a modern kitchen anyway.

What does Phoenixville Borough permitting cost for a kitchen project?

Permit fees through Phoenixville Borough typically run 1–2% of contract value. On a $90,000 borough kitchen, expect roughly $900–$1,800. We pull every required permit, schedule the inspections around the production schedule, and show the permit cost as a transparent line item on the proposal — it’s never buried in markup or sprung on you mid-project.

Do I need to hire my own designer?

No separate designer needed — we’re design-build, so the team that designs your Phoenixville kitchen is the team that builds it; nothing gets drawn that we can’t build for the price quoted (and we collaborate cleanly if you already have an architect).

How will you communicate with me during construction?

During construction you get one point of contact who answers calls and texts, weekly progress updates, and a heads-up before anything becomes a problem, plus the live JobTread portal showing schedule, budget, and invoices. On a 130-year-old rowhome, that communication is the difference between a manageable project and a stressful one.

Can I see Phoenixville kitchen projects you’ve completed?

Yes — see our Phoenixville green subway tile kitchen remodel and the full project portfolio.

Do you also remodel bathrooms in Phoenixville?

Yes — Phoenixville bathroom remodeling — same fixed-price model, same Phoenixville Borough permitting, same in-house crews. See everything we do in Phoenixville.